What Are the Safe Ways To Do Plasma Cutting?
Take a look at your own safety all the time when you are dealing with the dangerous concept of plasma cutting.
The plasma cutter is being surrounded by an electric circuit that puts together the torch and the work object. Always be reminded that any friction or motion that taps the work object will also pass the same object through the electric circuit. It is dangerous to tap or touch any portion of the torch body or work object when plasma cutting is still going on because it may also give you a sudden thunder attack that will endanger your existence.
There are so many types of metals and other electrically conductive metals that are always subject to plasma cutting. However, the voltage electric arc and the compressed gas needed for the plasma cutter varies from one another and would usually depends on the type of steel, welding materials or other electrically conductive metals. An absolute high voltage electric arc is needed amounting to 100-200 volts to operate the plasma cutters unlike the welding cutter that normally carries lesser amount that the plasma cutter.
Never get the work object from while you are still cutting the object because it might lead to danger. The work object may always be left on the cutting bench surrounded by a ground table if the plasma cutting is not yet done with the goal. Never retrieve the ground clamp as well during the plasma cutting operation. It is necessary to make sure that the ground cable is not removed and is still accompanied in the work object.
Get yourself back up when gloves and boots when you are doing the plasma cutting process as your clothes and body will be dry thereafter.
Remind yourself all the time that you are prohibited to sit, stand, lie or touch and surfaces that are wet just to avoid danger when using the plasma cutter system. Make sure that the ground cable works well and connected to the work object when you are undertaking a plasma cutting process. If there are damages in the plasma cutting machine, always have a plan b and replace it with a new one as soon as possible.
Using boots and gloves is necessary as one must also have proper eye protection if you are in the verge of plasma cutter operation. Learning that there are so-called arc rays producing dangerous ultraviolet and infrared waves that has the tendency to cause cataracts and skin problem when you don’t keep a proper eye protection. Some of the necessary clothes and garments to prepare are the gloves, welding safety shoes, welding helmets, flame-retardant clothes, and trousers.
Source: plasma cutter